ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 302)

ZyWALL 100 Internet Security Gateway
VPN/IPSec Setup 28-19
Table 28-7 Menu 27.1.1.2 — Manual Setup
FIELD DESCRIPTION EXAMPLE
Key3 Enter a unique eight-character key. It can be comprised of any character
including spaces (but trailing spaces are truncated).
Authentication
Algorithm
Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER]. MD5
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
123456789a
bcde
AH Setup The AH Setup fields are N/A if you chose an ESP Active Protocol.
SPI (Decimal) The SPI must be from one to four unique decimal characters ("0" to "9")
long.
N/A
Authentication
Algorithm
Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER]. N/A
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.