Yamaha HTR-6180 - Manual (Page 114)

110
En
Advanced setup
■ Remote control AMP ID
REMOTE AMP
Use this feature to set the AMP ID of this unit for remote
control recognition. This feature is useful when you
operate this unit and the other Yamaha receivers/
amplifiers in the same room separately.
Choices: ID1, ID2
• Select “ID1” when the remote control AMP ID code is
set to “00001”.
• Select “ID2” when the remote control AMP ID code is
set to “00002”.
Setting remote control AMP ID codes
You need to set the remote control AMP ID code for the
remote control.
1
Press 2
CODE SET using a ballpoint pen or
a similar object.
The BTRANSMIT indicator on the remote control
flashes twice.
2
Press the numeric buttons (6) to enter the
code number “00001” or “00002”.
The BTRANSMIT indicator on the remote control
flashes twice, and the AMP ID code is changed.
*1 The remote control setting
*2 The setting of this unit
■ Remote control TUNER ID
REMOTE TU
Use this feature to set the TUNER ID of this unit for
remote control recognition.
Choices: ID1, ID2
• Select “ID1” when the remote control TUNER ID code
is set to “82915”.
• Select “ID2” when the remote control TUNER ID code
is set to “82178”.
Setting remote control TUNER ID codes
You need to set the remote control TUNER ID library
code for the remote control.
1
Press 4
TUNER to select “TUNER” as the
input source.
2
Press 2
CODE SET using a ballpoint pen or
a similar object.
The BTRANSMIT indicator on the remote control
flashes twice.
3
Press the numeric buttons (6) to enter the
code number “82915” or “82178”.
The BTRANSMIT indicator on the remote control
flashes twice, and the TUNER ID code is changed.
*1 The remote control setting
*2 The setting of this unit
See page 109 for the operation of the advanced setup.
AMP ID
code *1
Function
Remote
control AMP
ID *2
00001
(initial setting)
To operate this unit using
the default code. ID1
(initial setting)
00002
To operate this unit using
an alternative code.
ID2
TRANSMIT
STANDBY POWER POWER POWER
AV TV
TRANSMIT CODE SET
Flashes
TRANSMIT
4 3 2 1
8 7
0 9
6 5
SUR. DECODE ENHANCER PROG
PARAMETER STRAIGHT PURE DIRECT
AUDIO SEL MULTI CH IN
Flashes
TUNER ID
code *1
Function
Remote
control
TUNER ID *2
82915
(initial setting)
To operate this unit using
the default code. ID1
(initial setting)
82178
To operate this unit using
an alternative code.
ID2
TUNER
TRANSMIT
STANDBY POWER POWER POWER
AV TV
TRANSMIT CODE SET
Flashes
TRANSMIT
4 3 2 1
8 7
0 9
6 5
SUR. DECODE ENHANCER PROG
PARAMETER STRAIGHT PURE DIRECT
AUDIO SEL MULTI CH IN
Flashes