Yamaha HTR-6180 - Manual (Page 71)

67
En
SIRIUS Satellite Radio™ tuning
BA
S
IC
OPERA
T
ION
English
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
on page 66.
1
Search for a channel you want to set as a
preset channel by using one of the SIRIUS
Satellite Radio search modes.
See “Basic SIRIUS Satellite Radio™ operations” on
page 65 for details.
2
Press F
MEMORY (or 9MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
You must proceed to and carry out steps 3 through 4 while
the MEMORY indicator is flashing in the front panel
display.
3
Press E
PRESET/TUNING/CH l / h
(or 8
PRESET/CH k / n) repeatedly to select
a preset channel group and number (A1 to
E8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
y
You can select the preset station group (A to E) by pressing
DA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly.
4
Press F
MEMORY (or 9MEMORY) to set
the selected SIRIUS Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search a channel by pressing EPRESET/
TUNING/CH l / h (or 8PRESET/CH k / n).
■ Setting the code number and the locked
channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked.
1
Set the operation mode selector to F
AMP
on the remote control and then press I
SET
MENU to display.
2
Press 8n to select “MANUAL SETUP” and
then press 8
ENTER.
3
Press 8n repeatedly to select “INPUT
MENU” and then press 8
ENTER.
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE and then
press 4SIRIUS.
Setting the SIRIUS Satellite
Radio™ preset channels
Note
001 SIRIUS Hit
Currently selected channel number
MEMORY
Flashes
MEMORY
A1 023 Hair Na
Currently selected preset channel group and
number
Flashes Flashes
Note
Setting the Parental Lock
A1:023 Hair Na
Colon (:)