If an error screen appears, If “warning” appears – Yamaha HTR-6180 User Manual

Page 40

Advertising
background image

36

En

Optimizing the speaker setting for your listening room (YPAO)

15

Press 8

ENTER to confirm your selection.

The top “SET MENU” screen appears in the OSD.

16

Press I

SET MENU to exit from “SET

MENU”.

y

If you change speakers, speaker positions, or the layout of your
listening environment, run “AUTO SETUP” again to recalibrate
your system.

If an error screen appears

Press 8k / n / l / h to select “RETRY” or
“EXIT” and then press
8

ENTER.

The following display is an example when “E-9:USER
CANCEL” appears in the OSD.

Choices: RETRY, EXIT
• Select “RETRY” to retry the “AUTO SETUP”

procedure.

• Select “EXIT” to exit from the “AUTO SETUP”

procedure.

y

If “E-5:NOISY” appears, “PROCEED” also appears in the
choices. When you select “PROCEED”, this unit continues the
measurements and settings, but the settings may not be optimal.

If “WARNING” appears

When this unit detects potential problems during the
“AUTO SETUP” procedure, “WARNING” appears in the
top result display. Check the warning messages to correct
your speaker settings.

Warnings differ from errors in that warnings do not cancel the
“AUTO SETUP” procedure.

1

Make sure the pointer is pointing at
“WARNING” and then press
8

ENTER to

display the detailed information about the
warning.
The number on the right of “WARNING” indicates
the number of warning messages.

2

Press 8l / h repeatedly to toggle between
the warning displays.

y

• For details about each warning message, see the “AUTO

SETUP” section in “Troubleshooting” on page 120.

• When the corresponding warning message is not

applicable to a speaker, “––” is displayed instead.

• If “SWFR: TOO LOUD” or “SWFR: TOO LOW” appears

in the “W-3: LEVEL ERROR” display, adjust the volume
level of the subwoofer(s).

3

Press 8

ENTER to return to the top result

display.

SET MENU

. ;AUTO SETUP

;MANUAL SETUP

.A;SIGNAL INFO

[ ]/[ ]:Up/Down
[ENTER]:Enter

p

p

ERROR

. E-9:USER CANCEL

Don't operate

any function

>RETRY

EXIT

[ ]/[ ]:Select
[ENTER]:Enter

[

[

Note

AUTO SETUP

RESULT

. WARNING(3)

>SET

CANCEL

[ ]/[ ]:Up/Down
[ENTER]:Detail

SP

:

3/4/0.1

DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB

WARNING

W-1:OUT OF PHASE
Reverse Channel
FL

--

CENTER
PL

PR

SL

SR

SBL

SBR

[ ]/[ ]:Select
[ENTER]:Return

[

[

Advertising