Yamaha RX-SL100RDS - Manual (Page 36)

34
ADVANCED OPERATIONS
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you do not connect surround speakers, Virtual CINEMA
DSP activates automatically whenever you select a
CINEMA DSP sound field program.
Virtual CINEMA DSP will not activate, even when Surround L/R
is set to “None” (see page 41), in the following cases:
– When the 6ch Stereo, DOLBY DIGITAL, Pro Logic, Pro
Logic II, or DTS program is selected.
– When the sound effect is turned off.
– When a digital signal with a sampling frequency greater than
48 kHz is input to this unit.
– When using the test tone; or effect.
– When headphones are connected.
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 44 for details about the input mode).
Use this menu to manually adjust any input setting.
1
Press AMP.
2
Press SET MENU.
3
Press k / n repeatedly to select INPUT menu,
then press h .
4
Press k / n repeatedly to select Input Mode,
then press h .
5
Press k / n repeatedly to select an input
source (VCR, VIDEO 1, VIDEO 2, DTV/CBL,
DVD/CD), then press ENTER.
Virtual CINEMA DSP
Note
Selecting input modes
BASIC menu
SOUND menu
INPUT menu Input Assign
Input Mode
DTV/CBL
Input Assign DVD/CD
Input Mode SETTING
VCR
VIDEO1
VCR
VIDEO 1 Analog
VIDEO 2 Auto
DTV/CBL dts
DVD/CD
01EN.00_RX-SL100RDS.book Page 34 Thursday, November 27, 2003 12:42 PM