Yamaha RX-SL100RDS - Manual (Page 42)

40
SET MENU
Use this menu to manually adjust any speaker setting.
1
Press AMP to select the AMP mode, then
press SET MENU.
2
Press k / n repeatedly to select SOUND menu,
then press h .
3
Select the desired parameters, then press
ENTER to access and adjust.
■ Center SP. GEQ (Center speaker graphic
equalizer)
Use this feature to switch between the frequency bands
available.
To access these parameters, select:
SOUND menu > Center SP. GEQ >
You can adjust 5 frequency bands: 100Hz, 300Hz, 1kHz,
3kHz, 10kHz
■ SP Tone Control (Speaker tone control)
Use to adjust the amount of bass and treble output to your
speakers.
To access these parameters, select:
SOUND menu > SP Tone Control >
• Use Bass to adjust the speaker bass level.
• Use Treble to adjust the speaker treble level.
Choices: –10 to +10 (dB), Initial: 0 dB
■ HP Tone Control (Headphone tone
control)
Use to adjust the amount of bass and treble output to your
headphones.
To access these parameters, select:
SOUND menu > HP Tone Control >
• Use Bass to adjust the headphone bass level.
• Use Treble to adjust the headphone treble level.
Choices: –6 to +3 (dB), Initial: 0 dB
SOUND menu
MENU
SET MENU
AMP
then
OPTION menu SP Tone Control
BASIC menu HP Tone Control
SOUND menu Speaker Set
INPUT menu SP Distance
LFE Level
OPTION menu SP Tone Control
BASIC menu HP Tone Control
SOUND menu Speaker Set
INPUT menu SP Distance
LFE Level
OPTION menu SP Tone Control
BASIC menu HP Tone Control
SOUND menu Speaker Set
INPUT menu SP Distance
LFE Level
LFE Level
Dynamic Range
Center SP. GEQ
SP Tone Control
HP Tone Control
0
SP Tone Control
Dynamic Range
Center SP. GEQ
Bass
HP Tone Control Treble
Speaker Set
HP Tone Control
Center SP. GEQ
SP Tone Control
Bass
Speaker Set Treble
SP Distance
01EN.00_RX-SL100RDS.book Page 40 Thursday, November 27, 2003 12:42 PM