Zanussi ZDG 58 - Manual (Page 39)

LOCATION OF APPLIANCE
The appliance may be located in a kitchen, a kitchen/diner or bedsitting room, but not located in a bathroom or
shower room.
It is essential that there is a minimum clearance of 3mm between the top surface of the appliance and
the inside top of the cabinet. The unit must be fitted into a cabinet conforming to Fig. 1. The following
internal dimensions are particularly important.
Height 874..............Minimum 879.............. .Maximum
Width 560..............Minimum 570............... Maximum
Solid Pipe Depth 560..............Minimum N/A................Maximum
Flexible Pipe Depth 575..............Minimum N/A................Maximum
NOTE: Where a cupboard door with a handle is situated above the appliance, we recommend a minimum
clearance gap of 5mm between fascia top trim and door.
4
2000 recommended
560 min
874min 879max
600min
560min
570max
Fig.1