Zanussi ZDG 58 - Manual (Page 44)

To fit a 3 pin 13 amp plug to the end of the appliance cable (Fig.8).
Connect the wires as follows:
BROWN to the live terminal.
BLUE to the neutral terminal.
GREEN and YELLOW to the earth terminal.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked
with the letter 'E' or by the earth symbol or coloured GREEN or GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or
coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L'
or coloured RED.
FIT A 3 AMP FUSE TO THE PLUG FUSE HOLDER
9
GREEN AND
YELLOW
3 AMP
BROWN
BLUE
Fig.8