Zhone Technologies IMACS-200 - Manual (Page 105)

General Features 4-21
IMACS-200 General Features Remote Administration
RPT3 IP ADDR
The RPT3 IP Address is the IP address of the third Network Management System host running
an SNMP trap server.
RPT3 COMMUN STR
The RPT3 Community String holds the community string for the third NMS host running a
SNMP trap server. The community string provides additional security by rejecting messages
that do not contain the correct string. There must be an entry in this field to enable RPT3.
4.7 Remote Administration
The Ethernet port allows the user to telnet into the IMACS-200 and allows for remote
management, configuration and downloading of host code via a 10baseT Ethernet port.
4.7.1 Setting Up Remote Connectivity
Before using the remote Ethernet port, the crafts person must perform the following steps:
1. From the CPU Main screen in Figure 4-2, enter ‘I’ for tcp/Ip, as seen in figure Figure 4-11.
Figure 4-11.Setting up Remote Connectivity
2. Leave the HOST IP STATE as stdby for now.
3. Enter in the HOST IP ADDRESS: [device IP address]