Zhone Technologies IMACS-200 - Manual (Page 93)

General Features 4-9
IMACS-200 General Features CPU User Screens and Settings
4.3.3 Access Level Permissions
With the Admin level user, the Group setting can be changed on a group basis. Begin by
accessing the User Name Screen as shown in Figure 4-3 on page 4-6. Select the Group option
by typing “G”, and a screen such as in Figure 4-6 appears
Figure 4-6.Group Permissions Settings
Use the arrow keys to select the field and permission that you want to change, and access the
write capability by issuing a carriage return. The user can then set the access level to None,
Read only or Read Write (W) as desired. Following is the description of the Access Levels,
and what can be done in each.
WAN Provisioning
This covers all provisioning screens and activities associated with both the copper and optical
WAN interfaces.
WAN Alarms
This covers all alarm reporting screens and activities associated with both the copper and
optical WAN interfaces. Read access allows alarms to be viewed only. RW access allows
changes to severity, thresholds etc. (any provisionable alarm attributes)
WAN PMs
This covers all performance monitoring screens and activities associated with both the copper
and optical WAN interfaces. Read access allows PMs to be viewed only. RW access allows
changes to intervals, thresholds etc. (any provisionable PM attributes)