Yamaha GX707 - Manual (Page 45)

E
-35
English
Various sound control
■ Listening to the music with a sound field
effect
1 Play a source.
2 Press PROGRAM repeatedly until the name of the desired
program lights up on the sound field program indicator (5).
* Whenever you press
PROGRAM , the program changes and is
displayed as follows.
3
If desired, adjust the delay time and the output level of each
speaker. (For details, refer to the corresponding descriptions on
pages 35–36.)
Notes
• When YMERSION is selected, no sound is heard from the center
speaker nor rear speakers.
• If you play a source not encoded with Dolby Surround when PRO
LOGIC is selected, the source may not be played normally.
■ Adjusting delay time and speaker output
level
DELAY TIME
You can adjust the time difference between the beginning of the
sound from the front speakers and the beginning of the effect sound
from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made individually for both
PRO
LOGIC and HALL.
Control range
PRO LOGIC: 15, 20, 25, 30 milliseconds
HALL: 15, 20, 25, 30, 40, 50 milliseconds
1 1 Press CENTER/REAR/DELAY repeatedly until “DELAY”
appears on the display.
2 2 By pressing LEVEL + or – continuously, the value also changes
continuously.
PROGRAM
PRO LOGIC
PROGRAM
3 STEREO
PROGRAM
YMERSION
PROGRAM
HALL
(OFF)
Changes.
OPEN/ CLOSE DISC CHANGE
PROGRAM B.BOOST MUSIC
VOLUME
DIGITAL AUDIO
LEVEL
REC/ PAUSE TEST
—
PROGRAM
CENTER/
REAR/ DELAY
MUSIC
SLEEP INPUT
TAPE
VOLUME
PROGRAM
CENTER/REAR/DELAY
LEVEL- / +
PROGRAM