3Com NBX 3101SP - Manual (Page 14)

14 C HAPTER 1: G ETTING S TARTED
Table 4 Setting Your NBX NetSet Utility and NBX Messaging Password
Feature 3Com Phones Analog Phones
Password — Set Initially
If your system uses NBX Messaging, follow the NBX
voice prompts to set your NBX password (which is the
same for the NBX NetSet utility and voice messaging) OR
use the NBX NetSet utility, described next.
If your system uses a voice messaging application
other than NBX Messaging
1 , use this code sequence
to set your password for the NBX NetSet utility. 3Com
recommends that you use the same password for the
NBX NetSet utility and your messaging application.
For all voice messaging systems:
■
Use only 4- to 10-digit numbers
■
Do not use letters, *, or # as part of your password.
Message button and
follow the voice prompts
OR, for systems that do
not use NBX Messaging:
Feature
+ 434
+ new password
+ #
+ repeat your new
password
+ #
500 ** and follow the
voice prompts
OR, for systems that do
not use NBX Messaging:
#
(Feature Entry Tone)
+ 434
(Feature Entry Tone)
+ new password
+ #
(Feature Entry Tone)
+ repeat your new
password
+ #
(Confirmation Tone)
Password — Change
If your system uses NBX Messaging, follow the NBX
voice prompts to change your NBX password (which
changes your NBX NetSet utility password, because they
are the same) OR use the NBX NetSet utility, described
next.
If your system uses a voice messaging application
other than NBX Messaging
1 , use this code sequence
to change your password for the NBX NetSet utility.
3Com recommends that you use the same password for
the NBX NetSet utility and your voice messaging
application.
For all voice messaging systems:
If you forget your password, the administrator can reset
it to your extension. Then use this code (for applications
other than NBX Messaging) or the NBX voice prompts to
change it.
Message button
+ old password
+ #
+ 9
+ 2
+ follow the prompts
OR, for systems that do
not use NBX Messaging:
Feature
+ 434
+ old password
+ #
+ new password
+ #
+ repeat your new
password
500 **
+ extension number
+ old password
+ #
+ 9
+ 2
+ follow the prompts
OR, for systems that do
not use NBX Messaging:
#
(Feature Entry Tone)
+ 434
(Feature Entry Tone)
+ old password
+ #
(Feature Entry Tone)
+ new password
+ #
(Feature Entry Tone)
+ repeat your new
password
+ #
(Confirmation Tone)