3Com NBX 3101SP User Manual
Page 77
Speed Dials
77
If your administrator has assigned you to a group that allows you to
change your button mappings, log in to the NetSet utility and go to
Telephone Programming > Button Mapping to view or change the
current personal speed dial assignments for your telephone’s buttons. See
earlier in this chapter.
You can also map a personal speed dial ID number to one of the available
Access buttons on your telephone from the Directory > One-Touch
Speed Dial page. See
“Special Case: One-Touch Speed Dials”
later in
this chapter.
To assign or change a personal speed dial number:
1 Log in to the NBX NetSet utility and go to Directory > Personal Speed
Dial.
2 In the Personal Speed Dial page, select an unassigned speed dial ID
number, or select the speed dial ID number for which you want to change
the speed dial number.
3 In the Speed Dial Number text box, type the telephone number that
you want the system to dial when you use that ID number.
Include all of the prefix numbers that you would normally dial, such as a 9
or 8 or 1 to access an outside line, and, if necessary, the country code or
area code. Do not use spaces, hyphens, commas, or other nonnumeric
characters.
4 In the Account Code box, type an account code if it is required or useful
for calls to this destination.
5 In the Comment text box, type a brief description, usually a name, that
corresponds to the number.
6 After you have made all of your changes to the personal speed dials, click
Apply to complete your changes.
To use a personal speed dial:
1 Pick up the handset. If you are using a 3Com 3101SP Basic Telephone,
you can press
(Speaker).
2 Press the Feature button plus the 3-digit personal speed dial code for the
number that you want to call. Or scroll to Personal Speed Dials on the
display panel, press Slct, scroll to the number that you want to dial, and
press Slct again.
If you dial a speed dial code that has no number assigned to it, the display
panel on your telephone shows the message “No number stored.”