3Com PalmPilot Professional Handbook - Manual (Page 50)

page 46 PalmPilot Professional Handbook
Adding Detailed Information to a Service Template
If you are using one of the pre-defined service templates, you will
probably only need to enter your user name and telephone
number. If you are creating a new service template, you may need
to provide additional information to connect to your ISP or dial-in
server. You use the Details dialog to add additional information to
a selected service template.
To open the Details dialog:
1. From the Network Preference screen, tap the word Service.
The pick list appears, listing all of the PalmPilot organizer’s
available pre-defined service templates.
2. Tap to select the service you want to use.
3. Tap the Details button. The Details dialog appears, as shown
in the following diagram:
Primary IP address
Secondary IP address
Select connection type
To select a connection type:
1. Tap the text to the right of the words, “Connection type.” The
pick list appears, listing the following connection types:
■ PPP. Point-to-Point protocol.
■ SLIP. Serial Line Internet Protocol
■ CSLIP. Compressed Serial Line Internet Protocol
2. Tap to select the connection type you want to use.