3Com PalmPilot Professional Handbook - Manual (Page 54)

page 50 PalmPilot Professional Handbook
■ 3 minutes. This means that your PalmPilot will wait three
minutes for you to open another application before it drops the
connection.
■ Power Off. This means that your PalmPilot will keep your
PPP or SLIP session connected until you power off your
PalmPilot (or until it times out). This option works best with
the PalmPilot Modem.
2. Tap to select a timeout value.
3. Tap OK to confirm your selection and return to the Network
Preferences screen.
Creating a Login Script
A login script is a series of commands, similar to an autoexec.bat
file, that automates logging in to your ISP. You can create login
script files by selecting commands from the Command pick list in
the Login Script dialog. Some of the commands from the
Command Pick list, like Send, require additional information to be
executed. Those commands have a parameter field so that you
can add the necessary data.
Note: You can also use non-ASCII and literal characters in your
login script. Refer to Appendix A: Non-ASCII Characters for Login
Scripts
for additional information.
To create a login script:
1. From the Details dialog, tap the Script button. The Login
Script dialog appears.
2. Tap on the word “End” to display the Command list, as
displayed in the following diagram: