3Com TRGpro - Manual (Page 218)

Page 210 CompactFlash™, CFpro™, and CFBackup™
"Conducting a HotSync operation via modem" in Chapter 6 of this
handbook.
Preparing your handheld computer
Inserting a CF modem card
1. Remove the CF card expansion slot door by pressing onto the
fingernail recess and pulling the door off.
2. Begin the process of inserting the CF modem card into the unit.
Grip the card by the edge opposite the connector side.
3. The grooved sides of the card will only allow it to be inserted into
the slot one way. Place the card onto the rails of the slot and
attempt to slide it into the unit. If the card does not slide, flip the
card around, making sure the connector-side is still facing into the
slot.
4. Slide the modem card all the way into the slot until it fully mates
with the connector.
5. Set up the vendor-supplied cabling to create a connection to a
standard telephone outlet.
Check your connection preferences:
1. In the Applications Launcher, tap the Preferences (Prefs) icon .