Avaya S8300 - Manual (Page 9)

Jsl © 2002 Avaya Inc All Rights Reserved IP Enabling Siemens
Hicom with Avaya
MultiVantage Solutions
LPH 11-27-02 9
Adding a TNDN64 T-1 Board:
<add-bcsu
BOARD = ?
BOARD : SPECIFY BOARD TYPE
CHARACTERISTIC : REQUIRED CONDITIONAL
POSSIBLE VALUES : STMA STMA
SLMN SLMN USED FOR NX64
IPDN IPDN BOARD USED FOR ISDN APPLICATIONS
RPER ROLM PERIPHERAL BOARDS
RT1 ROLM T1 BOARD
TMD DIGITAL TRUNK MODULE WITH 24 CHANNELS
RG RING GENERATOR
SIUP SIGNALLING UNIT PERIPHERY
PER PERIPHERY MODULE
BOARD = tmd
LTG = 1
LTU = 1
SLOT = 79
PARTNO = q2484-x (part number for a TNDN64P number will vary with hardware)
FCTID = 2 ???
LWVAR = ?
LWVAR : LOADWARE VARIANT
CHARACTERISTIC : OPTIONAL
POSSIBLE VALUES : MAX. OF 8 POSITIONS
LWVAR =0
CABTYP = 1
TIMTYP = ?
TIMTYP : SPECIFY SYSTEM OR LOOP TIMING FOR TMD24
CHARACTERISTIC : OPTIONAL
POSSIBLE VALUES : SYST TMD FRAME TIMING DRIVEN BY SYSTEM
LOOP LOOPBACK STATE
TIMTYP =syst
OESDISTH =30
OESREQTH =4
SESDISTH =10
SESREQTH =10
SIGTYP = ?
SIGTYP : TYPE OF SIGNALING ON TMD24 SPAN
CHARACTERISTIC : REQUIRED CONDITIONAL
POSSIBLE VALUES : CVN CORNET-VN LINK WITH 24 CHANNELS
CCO DMI LINK WITH 24 CHANNELS
MOS DMI LINK WITH MESSAGE ORIENTED SIGNALING
BOS DMI LINK WITH BIT ORIENTED SIGNALING
CAS TMD LINK WITH CHANNEL ASSOCIATED SIGNALING
SIGTYP = mos
NETUSR = ?
NETUSR : USER TO EMULATE NETWK OR USER ON DMI LINK
CHARACTERISTIC : OPTIONAL
POSSIBLE VALUES : USER USER WILL EMULATE USER END OF DMI LINK
NETWK USER WILL EMULATE NETWK END OF DMI LINK
NETUSR = user