Unpacking, Package contents, Mounting the v7111 24-port – 3Com V7111 User Manual
Page 19: Mounting the v7111 24-port on a desktop
When you have completed the above relevant sections you are then ready to start
configuring the gateway (see
Chapter 3: Configuring the V7111
Unpacking
To unpack the V7111 24-PORT, follow these 6 steps:
1
Open the carton and remove packing materials.
2
Remove the V7111 24-PORT gateway from the carton.
3
Check that there is no equipment damage.
4
Check, retain and process any documents.
5
Notify 3Com or your local supplier of any damage or discrepancies.
6
Retain any diskettes or CDs.
Package Contents
Ensure that in addition to the V7111 24-PORT, the package contains:
AC power cable.
2 short equal-length brackets and bracket-to-device screws for the 19-inch rack
installation.
Mounting the V7111 24-PORT
The V7111 24-PORT can be mounted on a desktop or installed in a standard 19-inch rack.
See
for cabling the V7111 24-PORT.
Mounting the V7111 24-PORT on a Desktop
No brackets are required. Simply place the V7111 24-PORT on the desktop in the position
you require.
Figure 10
Desktop or Shelf Mounting
3Com VCX V7111 Analog Gateway Installation Guide
19