3Com V7111 - Manual (Page 28)

Figure 17 Client Configuration Screen with Blank Parameters
Assigning an IP Address Using the Voice Menu Guidance
To assign an IP address using the voice menu guidance, follow these 7 steps:
1 Connect a telephone to one of the FXS ports. Lift the handset and dial ***12345 (three
stars followed by the digits 1, 2, 3, 4, 5).
2 Wait for the 'configuration menu' voice prompt to be played.
3 To change the IP address, press 1 followed by the pound key (#).
ƒ The current IP address of the gateway is played. Press # to change it.
ƒ Dial the new IP address; use the star (*) key instead of dots ("."), e.g. 192*168*0*4
and press # to finish.
ƒ Review the new IP address, and press 1 to save it.
4 To change the subnet mask, press 2 followed by the # key.
ƒ The current subnet mask of the gateway is played. Press # to change it.
ƒ Dial the new subnet mask; e.g. 255*255*0*0 and press # to finish.
ƒ Review the new subnet mask, and press 1 to save it.
28 3Com VCX V7111 Analog Gateway Installation Guide