Secure prints, proof prints, and saved prints – 3Com Phaser Color Printer 860 User Manual
Page 10
4
Phaser 860 Color Printer
Advanced Features
Secure prints, proof prints, and saved prints
You can choose one of the following special job types:
■
Secure Print: Print a confidential document; the password-protected job is stored on
the printer’s hard disk drive. The job prints only after you enter the password on the
printer's front panel.
■
Proof Print: Print only one copy of the job so you can proof the copy. If you want to
print the remaining copies, select the job name on the printer's front panel.
■
Saved Print: Store the job on the hard disk so you can print it on demand. The job
isn't deleted after printing.
Note
The printer must have a hard disk installed (and the DP Feature Set) to do secure
prints, proof prints, and saved prints. These jobs are stored on the hard drive and
remain in the printer even when it is powered off.
Printing secure print, proof print, and saved print jobs
You specify that the job is a secure print, proof print, or saved print job in a supported
driver:
■
Windows 95 / Windows 98 PostScript driver:
On the Setup tab, choose the job type. For a secure print, also enter a four-digit
password to assign to this job. For proof prints and saved prints, also enter the name
you want to give this job.
■
Windows 2000 / Windows NT driver:
On the Output Options tab, choose the job type. For a secure print, also enter a
four-digit password to assign to this job. For proof prints and saved prints, also enter
the name you want to give this job.
■
LaserWriter 8.6 or 8.7 driver:
In the Print dialog box, select the Job Type pull-down menu, then choose the job type.
For a secure print, also enter a four-digit password to assign to this job. For saved
prints, also enter the name you want to give this job.
To print a secure job, specify the password on the printer's front panel:
1.
With
Menus
highlighted, press the Scroll Down key to scroll to
Printable Pages
.
2.
Press the OK key.
3.
If necessary, scroll to
Secure Print Jobs
.
4.
Press the OK key.
5.
Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the password, then press the OK key to accept that digit.
6.
Repeat step 5 for the second, third, and fourth digits.
7.
If necessary, press the Scroll Down key to scroll to
.
8.
Press the OK key to print the job with that password.