3Com Phaser Color Printer 860 - Manual (Page 33)

Advanced Features and Troubleshooting Manual 27
Printer Management
Printer Management
You can configure and manage your printer:
■
On the front panel
■
Using CentreWare IS Printer Management software
■
Through Usage Profile Reports, which can be emailed when the printer needs
attention (such as needing more paper)
This section covers the following features related to the operation of your printer:
■
The printer’s Startup Page — see page 30
■
Protected mode for the front panel menus — see page 31
■
Sys/Start Job execution — see page 32
■
Manual feed timeout — see page 33
■
Front panel intensity — see page 33
■
Front panel contrast — see page 34
■
Intelligent Ready mode — see page 34
■
Front panel language — see page 35
■
Automatic tray switching — see page 35
CentreWare IS Printer Management software
CentreWare Internet Services™ Printer Management software is a printer management tool
that uses a web browser to connect to the printer and gather printer information:
■
Job status
■
Job accounting
■
Printer usage
■
Routine troubleshooting
■
Configuration of printer settings
CentreWare IS requires a TCP/IP connection. To view information on your printer, enter
your printer’s IP address as the URL in a web browser. For example, if your printer’s IP
address is 113.25.72.34, the URL would be http://113.25.72.34. The CentreWare IS
interface appears on your computer’s screen.
For detailed information on CentreWare IS Printer Management software, refer to its
online help. You can access interactive troubleshooting assistance by
selecting Technical Support from the Support tab.
For general information, access the following web site:
www.xerox.com/officeprinting/products/860/sprt.html
then click the CentreWare link