Accessing the switch, Security access levels, User access level – 3Com 3800 User Manual
Page 37: Ccessing, Witch, Security access levels 3-1, User access level 3-1, Chapter 3, “accessing the switch
3
A
CCESSING
T
HE
S
WITCH
This chapter describes the following information that you can use to
begin managing the Switch 3800:
■
Security access level overview
■
Configuring the Switch for management
■
Switch management methods
■
Configuring SNMP
CAUTION: For configuration changes to be retained through a Switch
power cycle or reboot, you must issue a SAVE command after you have
made the change. For more information on the SAVE command, refer
to Chapter 10.
Security Access
Levels
The Switch 3800 supports two security access levels:
■
User
■
Administrator
User Access Level
A user-level account can view all manageable parameters, with the
following exceptions:
■
User account information
■
SNMP community strings
A user-level account can use the ping command to test device
connectivity. A user-level account can also change the password
assigned to the account name. If you have logged on with a user
access level, the command-line prompt ends with a (>) sign. For
example:
3C16910>
SW3800.BK Page 1 Tuesday, May 5, 1998 5:20 PM