Fein MultiMaster Marine - Manual (Page 15)

15 en
Specifications.
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
*These values are based on a work cycle consisting of
no-load and full-load operation of the same duration. For
information on the vibration class assigned to the appli-
cation tool, please see the enclosed data sheet
3 41 30 335 06 0.
Environmental protection, disposal.
Packaging, worn out power tools and accessories should
be sorted for environment-friendly recycling. Further
information can be obtained from your specialist dealer.
Accessories.
Only use accessories recommended by FEIN.
Type M ULTI M ASTER FMM250 M ULTI M ASTER FMM250Q
Reference number 7 229 36 7 229 37
Power input 250 W 250 W
Output 130 W 130 W
Power supply type 1 ~ 1 ~
Oscillating frequency 11 000 – 20 000/min 11 000 – 20 000/min
Weight according to EPTA-Procedure 01/2003 1.2 kg 1.4 kg
Class of protection II II
Oscillating angle 1.6 ° 1.6 °
M ULTI M ASTER FMM250 M ULTI M ASTER FMM250Q
Sound emission
Measured A-weighted sound power level L
wA
(re 1 pW),
in decibels
85 85
Measuring uncertainty K
wA
, in decibels 3 3
A-weighted emission pressure power level measured at the
workplace L
pA
(re 20 µPa), in decibels
74 74
Measuring uncertainty K
pA
, in decibels 3 3
Measured C-weighted peak sound pressure level at the
workplace L
pCpeak
, in decibels
96 96
Uncertainty K
pCpeak
in decibels 3 3
REMARK: The sum of the measured emission value and respective measuring inaccuracy represents the upper limit
of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard (see last page in this Instruction
Manual).
Vibration
Classification of FEIN application
tools according to vibration class
Weighted
acceleration*
VC0 < 2.5 m/s
2
VC1 < 5 m/s
2
VC2 < 7 m/s
2
VC3 < 10 m/s
2
VC4 < 15 m/s
2
VC5 > 15 m/s
2
3 m/s
2
K
3 41 01 078 06 0.book Seite 15 Dienstag, 16. März 2010 7:39 07