Fein KBM32Q - Manual (Page 12)

12
KBM 32 Q EN
For your safety.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual and the
enclosed “General Safety Instructions” (docu-
ment number 3 41 30 054 06 1), including the
figures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Please also observe the relevant national indus-
trial safety regulations (e.g. in Germany:
BGV A3).
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
This Instruction Manual and the enclosed “Gen-
eral Safety Instructions” should be kept for later
use and enclosed with the power tool, should it
be passed on or sold.
Special safety instructions.
Secure the power tool with the clamping strap
supplied if there is danger of it falling, especially
for work carried out at a height, on vertical con-
struction elements or above the head. If there is a
power cut, or the mains plug is pulled out, the
magnetic holding power is not maintained.
When working overhead or on vertical surfaces,
the coolant container must not be used. Use a
coolant spray instead. Liquids penetrating
your electric power tool may cause electric
shock.
DANGER This sign warns of a directly imminent, dangerous
situation. A false reaction can cause a severe or
fatal injury.
WARNING This sign indicates a possible dangerous situation
that could cause severe or fatal injury.
CAUTION This sign warns of a possible dangerous situation
that could cause injury.
It is forbidden to dispose of
the product in the unsorted
household waste. Worn out power tools and other electrotechnical
and electrical products should be sorted sepa-
rately for environment-friendly recycling.
Class of protection I Product with basic insulation and exposed (touch-
able), conductive parts additionally connected to
the protective earth conductor.
mm Millimeter Unit of measure for length, width, height or depth
kg Kilogram Unit of measure for the mass
V Volt Unit of measure for the electric voltage
A Ampere Unit of measure for the electric current intensity
W Watt Unit of measure for the output
N Newton Unit of measure for the force
min Minutes Unit of measure for the time
~ or a. c. Current type Alternating current
or d. c. Current type Direct current
1 ~ Power supply type Alternating current single-phase
n
o
No-load speed Revolution speed at no-load
1/min per minute Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
Ø Diameter Diameter of a round part
Symbol Term, meaning Explanation
3 41 01 011 06 3.book Seite 12 Mittwoch, 20. Juni 2007 7:58 07