SoundMax SM-CMD3014 User Manual
Page 14
14
ral operations
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press EJECT
button and then press RESET button (hole) under the panel to restore the unit to the original factory
settings.
Power button
Press any button to turn on the unit. Press POWER button on the RC or press and hold POWER/MUTE button
on the panel to turn off the unit.
Monitor tilt angle
Press TILT button to enter the monitor tilt angle adjustment mode. Press LEFT/RIGHT cursor buttons
repeatedly to select the position: 0 => 1 => 2 => 3 => 4 => 5 => 6. The monitor will flip down accordingly.
Volume control
Press VOL+ button to increase the volume level. Press VOL- button to decrease the volume level.
Turning the sound off
When the power is on, press POWER/MUTE button on the panel or MUTE button on the RC to turn the sound
off. Press it again or adjust volume to turn the sound on.
Mode setting
Change playing mode in a sequence of: Radio => DVD => USB => SD/MMC => TV => AV in. The DVD,
USB and SD/MMC modes are available if corresponding storage is connected to the unit.
On-screen display (OSD)
Press OSD button to show the current mode information on the display.