SoundMax SM-CMD3014 - Manual (Page 25)

25
Programming the playback
Press PTY/PROG button to open program menu.
Use cursor buttons to select the program position and use number buttons to input the desired
track/title/chapter (depending on the disc type).
Press PLAY/PAUSE button on the RC or 3/PLAY/PAUSE button on the panel to start program play, or
move the cursor to select PLAY and press ENTER button on the RC or OK button on the panel to play.
Move the cursor to CLEAR, press ENTER button on the RC or OK button on the panel to delete the
programmed list. Press PTY/PROG button to quit programming.
OSD (On Screen Display) function
Press and hold OSD button on the RC repeatedly to show current playback information, such as number of
track/chapter/title, current track/chapter/title time elapsed/remaining, total track/chapter/title time
remaining (depending on the disc type).
Zooming in/out
During playback of video or images on disc/USB/SD/MMC, press and hold repeatedly A-B/ZOOM button on
the RC, the picture will be zoomed in the sequence: X2 =>X3 =>X4 =>X1/2 => X1/3 => X1/4 => Normal.
PBC (Playback Control) function (for VCD only)
This function is only available for the VCD with PBC function.
Press and hold STOP/PBC button on the RC to set PBC on/off; when PBC is off, the screen will show PBC
menu if you switch PBC on. If the menu consists of a list of titles, you can select a desired one using number
buttons on the RC.
Changing angle (for DVD only)
Press ANGLE button on the RC to playback images at different camera angles. If a disc doesn’t support
multi-angle playback, this function will not work.