SoundMax SM-CMD3014 User Manual
Page 22
22
SB/SD/MMC operations
/SD/MMC notes
USB format supports 2.0. Capacity: up to 8 Gb. For correct and satisfactory operation, licensed SD/MMC
memory cards of famous brands should be used with this unit. Avoid using memory cards of unknown
brands. Capacity: up to 8 Gb.
Insert/Eject disc
Press EJECT button and insert a disc into the disc slot with label side up. The disc will be automatically
loaded into the unit. The first file in the root folder will be played.
Press EJECT button to eject the disc from the slot. If the disc is not removed from the slot within
several seconds, it will be automatically loaded into the slot again. When the disc is ejected and
removed, the unit will automatically switch to another mode.
Inserting an SD/MMC card/USB device
Open the front panel and insert an SD/MMC memory card into the card slot. Open the USB slot cover on the
front panel and insert a USB into the USB slot. Then the playing mode will be changed into Card or USB
mode automatically. The first card/USB device track playback will start.
Note: When SD/MMC card and USB device are both inserted, the playing mode will be changed into the
mode of the device inserted later.
Play/pause
The unit will automatically play from the first sound track recorded on a disc/SD/MMC/USB device. To
ensure good system performance, wait until the unit finishes reading the disc/device information before
proceeding. Press PLAY/PAUSE button on the RC or 3/PLAY/PAUSE button on the panel to pause playback,
press it again to resume playback.