SoundMax SM-CMD3014 - Manual (Page 19)

19
Radio operations
Band selection
Select the RADIO mode. Press BAND button on the panel or BND/RDM button on the RC to select the
desired band: FM1, FM2, FM3 (OIRT), AM (MW).
Manual/automatic tuning
Manual tuning: press TUN-/TUN+ buttons on the panel or SEEK-/PREVIOUS and SEEK+/NEXT on the
RC and hold for 2 seconds to enter the manual tuning mode. Press these buttons repeatedly to select a
frequency downward or upward step by step.
Automatic tuning: press TUN-/TUN+ buttons on the panel or SEEK-/PREVIOUS and SEEK+/NEXT on the
RC repeatedly, the automatic search will start. It will play when finds the station.
Programming tuner stations
There are 6 numbered preset buttons on the RC and panel, with which you can store and recall stations for
each band (18 FM, 6 AM). Select a station, then press and hold a preset button. The station will be saved in
the memory under the corresponding number. To recall a stored station, press the corresponding preset
button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold P.SCN/RPT button on the RC to enter auto store mode. The
radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto
store, press the button again.
Note: During auto station preset, the unit will search and store stations with the strong signal first, and
then weaker signal stations until the memories are full.
Preset scan: Select a band, press P.SCN/RPT button on the RC to scan all preset stations in the
memories of the current band. To stop preset scan, press the button again.