TIMBERK TMS 08.CH - Manual (Page 3)

2. PRECAUTIONS
A number of precautions is to be observed upon operation of an infrared heater and a remote control
unit. Improper operation as a result of ignoring precautions may harm health of the user and other
people, as well as damage their property.Detailed description of precautions is given in the infrared
heater's operation manual.
3. PURPOSE
The remote control unit allows to switch an infrared heater on/o , select power (except TCH A2) and set a
switch o timer for a heater from a remote control.
4. TECHNICAL CHARACTERISTICS
Technical characteristics of the remote control unit are given in Table 1 below.
Voltage
Frequency
Power consumption
Maximum load power
Remote control operating range
Electrical protection class
Moisture protection class
Overall dimensions
Weight V
Hz
W
W
m
-
-
mm
kg
220/380
50
0,6
3000
5
II
IP20
38 135 90
0,26
Table 1
Description Units
Product identification number
TMS 08.CH
3 www.timberk.com remote control block
The manufacturer reserves the right to change the set-list of the device (including liquid and powder components) for different supplies
without prior notice. The changes either in no way influence the basic technical parameters of the device or may improve them, and also
not violate the legislation or quality standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions of the device, but not more than by +\- 5-20% (depending
on the product category)