TIMBERK TMS 08.CH User Manual
Page 8
7. SCOPE OF DELIVERY
1. Control unit 1 pc.
2. Remote controller 1 pc.
3. Operation manual and guarantee card 1 pc.
4. Packing 1 pc.
NOTE:
To improve the product quality, design and technical characteristics of the remote control
unit as well as its complete set may be changed by the manufacturer without any prior
notice.
8. CONNECTION
1. Prior to connecting the control unit to the electric mains, make sure that parameters of
the electric mains in the place of connection comply with parameters, speci ed on the
marking plate with unit's technical data.
2. Work to connect the unit to the electric mains must be performed only by quali ed
specialists in accordance with the set Electric Installation Code and Safety Rules for
Operation of Electrical Installations Operating at Voltage Up to 1000V .
IMPORTANT!
All work to connect the control unit to an infrared heater must be performed only
after it is completely de-energized.
8
www.timberk.com remote control block