TP-Link TL-WR940N - Manual (Page 21)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-13-
¾ User Name and Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
¾
Confirm Password - Re-enter the password provided by your ISP to ensure the
Password you entered is correct. If the Password is different from the Confirm Password,
the screen will appear as shown below. Click OK, and re-enter the Password and
Confirm Password.
¾ Secondary Connection - It's available only for PPPoE Connection. If your ISP provides
an extra Connection type such as Dynamic/Static IP to connect to a local area network,
then you can check the radio button of Dynamic/Static IP to activate this secondary
connection.
z Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
z
Dynamic IP - Use dynamic IP address to connect to the local area network provided
by ISP.
z
Static IP - Use static IP address to connect to the local area network provided by
ISP. IP Address - IP Address - Enter the IP address provided by ISP for the
secondary connection. This address is used only for accessing the local area
network of the secondary connection. Subnet Mask - Enter the subnet mask
provided by ISP for the secondary connection.
4） If the connection type is L2TP, the next screen will appear as shown in Figure 3-9.