TP-Link TL-WR940N - Manual (Page 43)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-35-
Figure 4-16 Wireless Settings
¾ Wireless Network Name - Enter a value of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network. Considering your wireless network
security, the default SSID is set to be (XXXXXX indicates the last unique six numbers of each router’s
MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.
¾ Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection option.
¾ Mode - Select the desired mode. The default setting is 11bgn mixed.