TP-Link TL-WR940N User Manual

Page 38

Advertising
background image

TL-WR940N/TL-WR941ND

300Mbps Wireless N Router

-30-

¾

User Name/Password - Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.

¾

Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect button

to connect immediately. Click the Disconnect button to disconnect immediately.

¾

Connect on Demand - You can configure the router to disconnect from your Internet

connection after a specified period of inactivity (Max Idle Time). If your Internet connection

has been terminated due to inactivity, Connect on Demand enables the router to

automatically re-establish your connection as soon as you attempt to access the Internet

again. If you wish to activate Connect on Demand, click the radio button. If you want your

Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise,

enter the number of minutes you want to have elapsed before your Internet connection

terminates.

¾

Connect Automatically - Connect automatically after the router is disconnected. To use this

option, click the radio button.

¾

Connect Manually - You can configure the router to make it connect or disconnect manually.

After a specified period of inactivity (Max Idle Time), the router will disconnect from your

Internet connection, and you will not be able to re-establish your connection automatically as

soon as you attempt to access the Internet again. To use this option, click the radio button. If

you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time

field. Otherwise, enter the number in minutes that you wish to have the Internet connecting

last unless a new link is requested.

Caution: Sometimes the connection cannot be disconnected although you specify a time to

Max Idle Time, since some applications is visiting the Internet continually in the background.

6. If your ISP provides PPTP connection, please select PPTP/Russia PPTP option. And you

should enter the following parameters (Figure 4-12):

Advertising
This manual is related to the following products: