Parts name and functions (continued), How to use the wireless remote control, Handling the wireless remote control – MITSUBISHI ELECTRIC LDT462V User Manual

Page 15

Advertising
background image

English-11

English

Operating Range of the Wireless Remote Control

Point the wireless remote control toward the LCD monitor’s

remote control sensor during button operation.

Use the wireless remote control within a distance of about 7 m

from the front of the LCD monitor’s remote control sensor and

at a horizontal and vertical angle of within 30° within a distance

of about 3.5 m.

CAUTION:

The remote control system may not function when direct

sunlight or strong illumination strikes the remote control sensor

of the LCD monitor, or when there is an object in the path.

Handling the wireless remote control

*

Do not subject to strong shock.

*

Do not allow water or other liquid to splash on the wireless

remote control. If the wireless remote control gets wet, wipe

it dry immediately.

*

Avoid exposure to heat and steam.

*

Other than to install the batteries, do not open the wireless

remote control.

Parts Name and Functions (continued)

Installing and removing the wireless remote
control batteries

The wireless remote control is powered by 1.5 V AAA batteries.

How to install the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Align the batteries according to the (+) and (-) indications

inside the case.

3. Replace the cover.

How to remove the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Remove the batteries.

CAUTION:

Incorrect use of batteries can result in leaks or explosion.

Be careful especially about the following points.

• Place “AAA” batteries matching the (+) and (-) signs on each

battery to the (+) and (-) signs of battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes

shorter battery life or leakage of batteries.

• Remove dead batteries immediately to prevent battery

liquid from leaking into the battery compartment. Don’t

touch exposed battery acid because it causes damage to

your skin.

NOTE:
If you do not use the wireless remote control for a long period,

remove the batteries.

How to Use the Wireless Remote Control

Advertising