HONDA 2011 Accord Coupe - Manual (Page 110)

To cancel the storing procedure
after pressing the SET button, do
any of the following:
To select a memorized position, do
this:
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
Make sure the parking brake is set
and the shift lever is in Park
(automatic).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
All stored driving positions will be
lost if your vehicle’s battery goes
dead or is disconnected.
Press the SET button again within
5 seconds.
Fail to press a memory button
within 5 seconds.
Readjust the seat position.
Turn the ignition switch out from
the ON (II) position.
1.
2.
Selecting a Memorized Position
Driving Position Memory System
104
MEMORY BUTTONS
10/07/12 16:20:41 31TE0630_109