Lights – HONDA 2011 Accord Coupe User Manual
Page 372
Advertising
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
To change a bulb on the driver’s side,
undo the fastener and remove the air
intake cover by pushing the tab.
Then remove the duct.
3.
2.
On V6 models
Lights
366
FASTENER
AIR INTAKE COVER
BULB
TAB
DUCT
V6 models
STAY
V6 models
10/07/12 17:05:14 31TE0630_371
Advertising
This manual is related to the following products: