System setup – HONDA 2012 Pilot Navigation User Manual
Page 111
110 Navigation System
PILOT KA 31SZA830
System Setup
1. Stop the vehicle.
2. Select
Correct Vehicle Position,
and the system will display the
Correct vehicle position screen.
3. Use the
Interface Dial to move the
vehicle position arrowhead to the
correct location, and push in on the
Interface Dial. The display will
change to:
4. Rotate the
Interface Dial knob so
the vehicle position arrowhead is
pointing in the correct direction, and
push in on the
Interface Dial. The
display will return to the previous
screen.
NOTE:
If you continually have to do this, there
are either problems in the database or
GPS reception problems. See
Accessories Precautions on page 5.
5. As you drive, the current road will be
displayed at the bottom of the screen.
Color
From the
SETUP screen (Other), say
or select
Color and the following
screen appears:
00 PILOT_KA-31SZA830.book 110 ページ 2011年7月24日 日曜日 午後5時14分