System setup – HONDA 2012 Pilot Navigation User Manual

Page 113

Advertising
background image

112 Navigation System

PILOT KA 31SZA830

System Setup

Switching Display Mode Automatically

I

Recommended Display Mode Day/Night Settings:

• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).

• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).

• On the SETUP Color adjustment screen, choose white for the map

Day display and black for the map Night display (see

page 110). Inappropriate adjustment of these colors can cause the

Day/Night modes to appear inoperative.

llumination control

Priority Operation

But remember

Display Mode button

(see page 11)

1

Allows selection of

Day, Night, or Off display

mode. This button has the highest priority and
overrides all other display control adjustments
listed below.

Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.

Sunlight sensor (middle of
dash near the windshield, see
your Owner’s Manual for
location)

2

If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides (cancels) the

Night

display and displays the

Day display mode.

If desired, use the

Display Mode button

to override this automatic choice.

Dash illumination adjustment
buttons (see the vehicle
Owner’s manual for location)

3

When headlights are turned on, and you wish to
have the

Day display mode, then adjust the

illumination to the full bright setting (beeps).

Adjust the dash brightness back to mid-range
to allow auto switching by sensing the
headlights are on or off.

Headlights (Auto/On/Off)

4

When turned on, the display changes to

Night

display mode. The previous three controls
listed above can “cancel” this function.

Use the

Display Mode button

, or

adjust the dash illumination to full bright to set
the display to your desired choice.

Map

Day/Night screen color

choice (see page 111 for the

Day and Night color choices)

N/A

The user can select the color of the screen that
will be displayed for the

Day and Night

display modes described above.

For best contrast, ensure that the map color is
white for

Day and black for Night.

00 PILOT_KA-31SZA830.book 112 ページ 2011年7月24日 日曜日 午後5時14分

Advertising