Entering a destination – HONDA 2012 Pilot Navigation User Manual

Page 52

Advertising
background image

Navigation System

51

PILOT KA 31SZA830

Entering a Destination

If desired, rotate the

Interface Dial

knob to change the map scale. When
you have the crosshairs on the desired
icon, polygon, or road, push in on the

Interface Dial. The address of the
location you have selected will appear at
the top of the screen.

NOTE:
Information icons are displayed at
scales from 1 mile to 1/4 mile, POI icons
are displayed at 1/8 mile or less, and
roads are displayed at 1/4 mile or less.

If this is the desired address, push in on
the

Interface Dial again. If not, use the

Interface Dial to reposition the
crosshairs, then push in on the

Interface Dial again to display the new
address.

If you selected a single icon or road
segment, select

Set as Dest. to

calculate a route to the selected
destination. If you selected multiple
icons within the cursor radius, select an
item from the list. Then select

OK to

calculate a route to the selected
destination.

By Go Home 1 or 2

Selecting

Go Home 1 or 2 from the

DEST screen (Dest. MENU 1 or 2)
takes you to the address you have set as
“home.”

If a

Go Home 1 or 2 PIN has been set,

the system prompts you to enter your
PIN.

Say or enter your PIN. The system will
then display the

Calculate route to

screen (see Driving to Your Destination
on page 52).

If a

Go Home 1 or 2 PIN has not been

set, the system displays the

Calculate

route to screen after you select Go

Home 1 or 2 (see Driving to Your
Destination
on page 52).

NOTE:
• To edit Home Address, see
Home

Address on page 94.

• When no Home Address 1 or 2 has

been set, the

SETUP screen will be

displayed. For details, see Home
Address on page 94.

• Prior to departure, you can set areas

to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 105.

• PINs are optional. If you choose to

use a PIN, make sure you remember
it. If you forget your PIN, your dealer
will have to reset it for you, and all
PINs will be cleared.

• If a PIN is desired, enter it using the

Personal preference PIN number
feature in SETUP. See page 95 for
information on entering your PIN
number.

00 PILOT_KA-31SZA830.book 51 ページ 2011年7月24日 日曜日 午後5時14分

Advertising