Toggling on/off over-the-air subscription, Setting the range, Ending subscription – Plantronics Savi Office WO200 User Manual

Page 16: Setting default line to desk phone or pc, Subscription button indicator light

Advertising
background image

Plantronics Savi User Guide

16

toggling on/off over-the-air subscription

The Savi Office system is supplied with the over-the-air
subscription enabled. You can toggle on or off over-the-air
subscription using the subscription button on the base. With
the master headset

undocked

and the system idle, press the

subscription button for three seconds. The subscription button
will flash green for four seconds if over-the-air subscription is on
and red for four seconds if off.

Setting the range

With the master headset

docked

and the system idle, press the

subscription button for three seconds. Both the desk phone and
the PC talk buttons will flash green for high range. If you press
the subscription button again for three seconds, the talk buttons
will flash yellow for medium range. If you press the subscription
button again for three seconds, the talk buttons will flash red for
low range.

ending subscription

If the base is in subscription mode (secure or over-the-air) and
you want to stop the base from searching for a headset, press the
subscription button again. The subscription light will turn solid red
for four seconds and then return to its previous state.

Setting default line to desk phone or PC

The Savi Office system is supplied with the desk phone as the
default outbound line. This means any call initiated from the
headset with the call control button will open desk phone audio.
You can change your default outbound line from the base talk
buttons.

While the system is in idle mode, press and hold the PC talk
button or the desk phone talk button for three seconds to
select that device as your default outbound line. The talk button
indicator light will flash green for four seconds, confirming the new
setting.

Indicator light

PC talk button

Desk phone
talk button

Indicator light

Master headset subscribed to base

Solid green

Base in master subscribing mode

Flashes red and green

Base conferencing in additional guest
headset(s)

Flashes yellow and
green

Active conference call with guest
headsets subscribed to base

Solid yellow

Subscription button indicator light

No active audio link

Off

Incoming call

Flashes green

Active audio link

Solid green

Master headset muted

Solid red

Call on hold

Flashes red

Seeking Audio Link*

Solid yellow

Desk phone and PC talk buttons

indicator lights

Placing the headset in sleep mode

If you won’t be using the headset for a long duration and the
headset will not be in the charge cradle, you can put the headset
in sleep mode by pressing the call control button for three
seconds while in an idle state. To exit sleep mode, press the
headset call control button again for three seconds.

* When bringing up a link from the base, the talk button will be
solid yellow until a link is established. This could take up to several
seconds especially for wideband audio and/or when in moderate
to high density environments. If you press the talk button when
the indicator light is yellow, it will terminate the search for an audio
link.

Advertising