Plantronics Savi Office WO200 - Manual (Page 24)

Plantronics Savi User Guide 24
PC panel screen
• Choose whether you want PerSono Suite software to launch
when you login to Windows.
• See a list of supported softphones running on your PC.
• See which Plantronics device is attached to your PC and
working with PerSono Suite software.
• Customise how you want the PerSono Suite software to
manage your multimedia when a call begins/ends.
Advanced settings
Microsoft Office Communicator dial tone enabled
If this feature is set to ON, when a PC radio link is established,
Microsoft Office Communicator will assume the user is trying to
place a VOIP call and provide a dial tone.
If this feature is set to OFF, when a PC radio link is established,
Microsoft Office Communicator will sit idle.
“Microsoft Office Communicator dial tone enabled” can be set to
ON or OFF.
Microsoft Office Communicator certified product:
Default setting = ON
Standard product: Default setting = OFF
Audio sensing enabled
Audio sensing is a special feature supported by Plantronics
wireless devices that can detect audio signal at the USB port
and automatically establish a PC radio link between the base and
wireless headset without the user having to press the PC call
control button. If the parameter “Microsoft Office Communicator
dial tone enabled” is set to ON, every time the user presses the
PC call control button, the Microsoft Office Communicator dial
tone will be heard. However, the user may have pressed the PC
call control button to listen to music etc., and does not want to
hear the dial tone. In this case, if the user sets the “Audio sensing
enabled” parameter to “ON”, the radio link will be established
automatically when any PC audio is detected at the USB port,
thus eliminating the need for the user to press the PC call control
button.
“Audio sensing enabled” can be set to ON or OFF.
Microsoft Office Communicator certified product:
Default setting = ON
Standard product: Default setting = OFF
Security screen
PerSono Suite software allows the base settings to be locked
so another user cannot change the settings. This requires the
creation of a password for the system. To create a password so
you can lock/unlock base settings complete the following:
1 From the security screen, create and confirm your new
password. Press OK.
A new security screen will appear.
2 Reenter your password.
3 Press OK.
This will bring up the base settings page.
4 Select your settings from the menu and lock/unlock
each feature as desired.
5 Press Confirm to save the settings.
Once you have created your password, you can change your
password as follows:
1 From the security screen, click the arrow to the right of
“Reset Password”.
The security screen will expand.
2 enter your current password, enter your new password,
and reenter your new password.
3 Press Confirm to reset your password.
IMPORtANt If you forget your password you need to call your
local Plantronics Technical Support for a skeleton password.
1 From the security screen, enter the skeleton password.
Press OK.
The security screen will expand.
2 Reenter the skeleton password, enter your new
password, and reenter your new password.
3 Press Confirm to reset your password.
NOte You will not be able to access the base settings page
using the skeleton password. You must first reset your password
and then enter your new password to access the base settings
page.