4configuration and test call, 1 checking configuration, 2 making a test call with desk phone – Plantronics Savi Office WO200 User Manual

Page 9

Advertising
background image

Plantronics Savi User Guide

9

4

Configuration and test call

4.1 Checking configuration

1

If your desk phone has a volume control set it to mid-
range.

2

On the base, ensure the Configuration switch is set to
“A” and the Desk phone speaking volume and Desk
phone listening volume are both set to 3.

NOte

For most phones, these factory default settings will sound

the best.

3

With your headset on, press the call control button on

the headset.

4

Remove the handset from desk phone cradle.

5

Listen for a dial tone. If the dial tone sounds clear, press
the call control button on headset and continue with
Step 6.

Making a test call with desk phone.

6

You can also fine tune the listening volume on the
headset by pressing the volume up button [+] to increase
the volume and the volume down button [-] to decrease
the volume.

7

If the dial tone still does not sound clear, adjust the
Configuration Switch until the dial tone sounds the best.

NOte

Multiple settings might work with your phone; however,

only one is the optimal position.

8

Press the call control button on the headset to complete
configuration.

9

Replace the handset into the desk phone cradle.

4.2 Making a test call with desk phone

1

If your desk phone has a volume control, ensure it is set

it to mid-range.

2

With your headset on, press the call control button on

the headset.

3

Remove the handset from desk phone cradle.

4

Dial the number using your desk phone.

5

If the listening volume is too loud or too soft, adjust the

listening volume on the headset by pushing the volume
up button [+] to increase the volume and the volume
down button [-] to decrease the volume.

6

If the listening volume is still too loud or too soft adjust

the Desk phone listening volume on the base. A setting
that is too high can produce an uncomfortable echo for
you.

7

If the speaking volume is too loud or too soft for your

listener, adjust the Desk phone speaking volume on the
base to the best setting for your listener. A setting that
is too high can produce an uncomfortable echo for you
and a distorted sound for you listener.

8

Press the call control button on the headset to end the

test call.

9

Replace the handset into the desk phone cradle.

For your safety, do not use headset at high volumes for extended
periods of time. Doing so can cause hearing loss. Always listen at

moderate levels. For more information on headsets and hearing
visit: www.plantronics.com/healthandsafety.

Configuration
switch

Desk phone
listening volume

Desk phone
speaking volume

Advertising