Candy VI 64 CPN User Manual

Page 3

Advertising
background image

24 -

INSTALLATION – ELECTRICAL CONNECTION

INSTALLATION – IMPORTANT NOTICE

«The installation receiving the appliance referred to must comply with the standard in force in

the installation country».

The ROSIERES company does not accept any responsibility if this provision is not complied

with.

Caution:

• Before connecting, check the power supply voltage shown on the meter, the circuit

breaker setting, the fuse rating and the earth continuity of the installation.

• Connection to the network must be by earthed socket outlet, or by means of a multi-

pole circuit-breaker having a distance between contacts of at least 3 mm.

If the appliance has a socket outlet, it must be installed so that the socket outlet is accessible.

• The green/yellow protection wire must be linked to the earth terminals, of the appliance

on one side, and the installation on the other side.

• The manufacturer will not be liable for any incident, or the possible

consequences that may arise from the use of the oven not earthed, or connected

to an earth with defective continuity.

• All work in relation to the power supply cable must be carried out by the after sales

service or someone with similar qualifications.

The hob comes without power supply cable. It is equipped with a terminal board for selecting

the type of electrical connection appropriate to the installation.

The terminal board has two connection options:

. Single phase

230 V~

. Three phase

400 V2N~

The installation must be protected by an appropriate fuse, see table page 25, and have

wires with large enough cross-section to supply the appliance normally.

The power supply cable must be selected according to the information of table page

25.

The operational setting up of household appliances in their environment is a

delicate operation that, if not done correctly, can have serious consequences

for consumer safety.
Therefore, this work must be entrusted to a professional who can carry it out

in compliance with the technical standards in force.

However, if despite this recommendation, the consumer carries out the

installation themself, Rosières will not accept any responsibility in case of technical

failure of the product whether or not it causes damage to goods and/or persons.

Advertising