Accusys ExaSAN SW-08 - Manual (Page 22)

2.2 Xsan Setup
Now that we’ve completed the ExaSAN configuration, this section guides you through the setup of your Xsan
software: including how to check the accessible LUNs and use the Xsan Admin application, plus create and mount
an Xsan volume.
2.2.1 Setup Xsan with MDC (Metadata Controller) and Clients
First we will install the Xsan software and then create a SAN (Storage Area Network) without LUNs.
2.2.1.1 Install Xsan Software on MDC and All clients
Typically, there will be a primary MDC and a backup MDC. The MDCs require Xsan Admin and all other clients
require Xsan software. Since there are only two Mac Pro computers in our sample ExaSAN Compact setup, we are
making the following recommendations:
1. Make sure that both computers are running OS X Server operating system
2. Install Xsan Admin on both computers during the Xsan software installation process; so that we will have two
MDCs – one as the primary and the other as the backup
Follow the instructions below to install the Xsan software.
Insert the Install Disc. Double click the “Install Xsan” icon to start the installation process on the primary MDC.
Follow the on-screen instructions to complete the installation. Keep in mind to select “Custom Install” and the “Xsan
Admin” option during installation as shown below.
Quick Start Guide
P20