ACR&Artex ELT to Nav Interface - Manual (Page 17)

25-69-10
Page 17 of 58
APR 30/12
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
453-6500
TASK 25-69-10-990-803
3. Approvals
SUBTASK 25-69-10-990-001
A. Certification
(1) FAA TSO C126 System Component
NOTE: Details of TSO certification for the ELT/NAV Interface are available in the “TSO
Qualification Test Report for the ELT/NAV Interface System” (Document 6288).
(a) The conditions and tests required for TSO approval of this article are minimum
performance standards. It is the responsibility of those installing this article either on or
within a specific type or class of aircraft to determine that the aircraft installation
conditions are within TSO standards. TSO articles must have separate approval for
installation in an aircraft. The article may be installed only if performed under 14 CFR
Part 43 or the applicable airworthiness requirements.
(2) JTSO-2C126
SUBTASK 25-69-10-990-002
B. RTCA DO-160C Compliance
(1) DO-160C Environmental Categories: C1-204A204204XRXXXXXBABA204BXXX
(2) A breakdown of the DO-160C environmental categories is provided in Table 2.
Table 2. Environmental Categories Breakdown
CATEGORY SECTION DESCRIPTION
C1 4.0 Temperature/Altitude
- 4.5.4 In-Flight Loss of Cooling
204 5.0 Temperature Variation
A 6.0 Humidity
204 7.0 Shock
204 8.0 Vibration
X 9.0 Explosion
R 10.0 Waterproofness
X 11.0 Fluids Susceptibility
X 12.0 Sand and Dust
X 13.0 Fungus
X 14.0 Salt Spray