ACR&Artex ELT to Nav Interface - Manual (Page 25)

25-69-10
Page 25 of 58
APR 30/12
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
453-6500
SUBTASK 25-69-10-870-004
D. 24-Bit Address Reprogramming Functionality
CAUTION: THE PROGRAMMING AND LABELING OF THE ELT MUST MATCH THE AIRCRAFT IN
WHICH IT IS INSTALLED. REMARK THE ELT PRODUCT LABEL AS NECESSARY TO
REFLECT NEW PROGRAMMING AND/OR COUNTRY OF REGISTRY. CONTACT THE
LOCAL REGULATORY AUTHORITIES RESPONSIBLE FOR ELT REGISTRATION AND
REFER TO THE APPLICABLE ELT ABBREVIATED COMPONENT MAINTENANCE MANUAL
FOR ELT REGISTRATION REQUIREMENTS.
(1) The ELT/NAV Interface provides the means to reprogram ELTs with 24-bit address location
protocol programming.
(2) This capability facilitates swapping ELTs from one aircraft to another when performing routine
maintenance, etc., without losing a significant amount of time reprogramming ELTs.
(3) If the ELT is not programmed with a 24-bit address location protocol, the ELT/NAV Interface
will not reprogram the ELT.