Acroprint TQ600M (software version 4.x and above) - Manual (Page 2)

1) Mount the Relay vertically on a solid wall or partition as near as possible to the
TQ600BC (Barcode) or TQ600M (Mag Stripe). Select a location that is easily
accessible for installation and service.
2) Disconnect the TQ600BC/M from the power then connect it to the Relay
(Acroprint p/n 01-0230-000) per the diagram below.
3) Connect the Relay to the External Signal Device.
4) Connect the Relay to a 120VAC power source.
Page 2 of 5
External Signal Devices Available from Acroprint:
Acroprint P/N Description Manufacturer
Manufacturer’s
Part Number
64-0103-000 Grille Horn Edwards Signaling 874-N5
4-1/4” Bell W.L. Jenkins Co. 1005 64-0104-000
64-0105-000
8” Bell W.L. Jenkins Co. 3005
TQ600BC/M
Internal
Relay
120VAC
External
Signal
Device
External
Relay
01-0230-000
4
2
1
120VAC Neutral
T
T
Hot
Neutral
Note: see pp. 3 & 4 for
terminal connection