Activeforever Image EC Mid Wheel Drive Reclining Power Wheelchair - Manual (Page 12)

11
5. OPERATION
Attention:
We recommend that the first few times you operate your Image EC you set the speed
adjustment button to the slowest setting until you become familiar with you new power chair.
◆ Speed / Profile Decrease Button
This button decreases the maximum speed setting or, if the control system is programmed for drive
profile operation, selects a lower drive profile.
◆ Horn Button
Press either button to sound the horn.
◆ Speed / Profile Increase Button
This button increases the maximum speed setting or, if the control system is programmed for drive
profile operation, selects a lower drive profile.
◆ Locking /Unlocking the power chair controller
Locking the power chair.
1. While the control system is switched on, depress and hold the on/off button.
2. After 1 second the control system will bleep. Now release the on/off button.
3. Deflect the joystick forwards until the control system beeps.
4. Deflect the joystick in reverse until the control system beeps.
5. Release the joystick, there will be a long bleep.
6. The power chair is now locked.
Unlocking the power chair.
1. Use the on / off button to switch the control system on. The maximum speed / profile indicator
light will be cycling side to side.
2. Deflect the joystick forwards until the control system beeps.
3. Deflect the joystick in reverse until the control system beeps.
4. Release the joystick, there will be a long bleep.
5. The power chair is now unlocked.