Activeforever Slendertone ReVive Back Pain Relief Belt - Manual (Page 6)

B M R B M R R E V I V E R E V I V E D I S P L AY D I S P L AY
The display symbols shown below allow you to see the battery status, elapsed treatment
time, stimulation phases and program selection. These are displayed on the LCD screen
on the front of your uinit.
1. Keylock is active, prevents accidental changes to intensity level.
2. Burst Mode activated.
3. During treatment the intensity bars will display on each channel.
4. The Timer counts down the amount of time left in the current session in minutes and seconds.
5. Pause Indicator appears when the treatment has been paused (see page 5 for a description of the Pause function).
6. Indicates which treatment program you are running (1 to 3).
7. The clock symbol appears when the Total Treatment Time is displayed when you switch the unit on.
8. Battery status indicator, shows the battery power remaining.
9. Pad contact indicator is shown when a poor pad connection is detected.
When a poor connection is detected:
• The bar graph of the channel(s) being used will flash.
• The pad contact indicator symbol will appear flashing on the display.
• An audible beep will be made by the unit.
• The treatment session timer will pause.
• The intensity level will drop to zero and the Up intensity keys will not work.
• When proper contact is restored, stimulation builds over 2 seconds to the previously set intensity level and the product will work
again as before.
6
1
2
3
8
7
6
4 5
9