Do a thorough visual inspection – Actron AutoAnalyzer CP7665 User Manual

Page 3

Advertising
background image

3

Vehicle Service Manual – Sources For Service
Information

The following is a list of sources to obtain vehicle service information for your
specific vehicle.

Contact your local Automotive Dealership Parts Department.

Contact local retail auto parts stores for aftermarket vehicle service
information.

Contact your local library. Libraries often allow you to check-out automo-
tive service manuals.

Do a Thorough Visual Inspection

Do a thorough visual and “hands-on” underhood inspection before
starting any diagnostic procedure! You can find the cause of many
problems by just looking, thereby saving yourself a lot of time.

Has the vehicle been serviced
recently? Sometimes things get
reconnected in the wrong place,
or not at all.

Don’t take shortcuts. Inspect
hoses and wiring which may be
difficult to see due to location.

Inspect the air cleaner and
ductwork for defects.

Check sensors and actuators for
damage.

Inspect ignition wires for:

- Damaged terminals.

- Split or cracked spark plug

boots

- Splits, cuts or breaks in the

ignition wires and insulation.

• Inspect all vacuum hoses for:

- Correct routing. Refer to ve-

hicle service manual, or Ve-

h i c l e E m i s s i o n C o n t r o l
Information(VECI) decal lo-
cated in the engine compart-
ment.

- Pinches and kinks.

- Splits, cuts or breaks.

• Inspect wiring for:

- Contact with sharp edges.

- Contact with hot surfaces, such

as exhaust manifolds.

- Pinched, burned or chafed in-

sulation.

- Proper routing and connec-

tions.

• Check electrical connectors for:

- Corrosion on pins.

- Bent or damaged pins.

- Contacts not properly seated

in housing.

- Bad wire crimps to terminals.

Advertising
This manual is related to the following products: